Gas Furnaces
GMH Hybrid 80% Gas Furnace
LIMITED INVENTORY
Product Features:
• Aluminized-steel dual-diametertubular heat exchanger
• Energy-saving, quiet four-speed circulator motor
• Durable 110-volt Silicon Nitride Igniter
• Electronic control board with self-diagnostics and provisions for • electronic air cleaner and humidifier
GMVC8 80% Variable Speed, Multi-Position, Two Stage Gas Furnace
Product Features:
• Aluminized-steel dual-diameter tubular heat exchanger
• ComfortNet™ Communications System compatible
• Efficient and quiet variable-speed circulator motor
• Durable 110-volt Silicon Nitride Igniter
• Electronic control board with self-diagnostics
• Auto-comfort mode for enhanced dehumidification
• Quiet two-speed induced draft blower

GMVC96 Gas Furnace (Replacing GMVC95)
GMVC96 96% Two Stage Variable Speed, Multi-Position Gas Furnace
What's New?
• Height reduction from 40" to 34.5"
• Cabinet width reduction: 80K BTU is now in a "B" width and 100K BTU is in a "C" width
• 20,000 BTU firing rate per burner that will deliver capacities from 40,000-120,000 BTU
•Factory installed internal trap for vertical applications
• Verical gas valve for easy field connection to either side of the cabinet
• Additional inlet air options: top plus both sides
• Thumb screws on the doors for easy service without tools
• Embossed single piece wrapper provides increased cabinet strength, and door fit with all models meeting <2% cabinet leakage
Product Features:
• Aluminized-steel tubular heat exchanger
• Efficient, quiet variable- speed circulator motor
• ComfortNet™ Communications
• System compatible
• Durable 110-volt Silicon Nitride Igniter
• Multiple continuous fan speed options offer quiet air circulation
• Electronic control board with self-diagnostics and provisions for air cleaner and humidifier
• Auto-comfort mode for enhanced dehumidification
• Quiet two-speed induced draft blower Cabinet air leakage (QLeak) =<2%
• All models comply with California Low NOx emissions standards

GMSS96 Gas Furnace (Replaces GMH 95%)
GMSS96 96% Single Stage, Multi-Speed, Multi-Position Gas Furnace
Limited Inventory
Product Features:
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant
memory fault code history output to a LED
• Color-coded low-voltage terminals with provisions
for electronic air cleaner and humidifier
• Certified for direct vent (2-pipe) or
non-direct vent (1-pipe)
• Easy-to-install top venting with optional
side venting
• Convenient left or right connection
for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and
blower section

NEW: GMES 80 Gas Furnace
GMES 80% Multi-Speed ECM Motor, Multi-Position, Two Stage Gas Furnace
Product Features:
• Stainless-Steel dual-diameter tubular heat exchanger
• Single stage heating with Multi Speed ECM motor
• Durable hot surface mini-igniter
• Electronic control board

NEW: GMES 96 Gas Furnace
GMES96 96% Single Stage, Multi-Speed ECM Motor, Multi-Position Gas Furnace
Product Features:
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable silicon nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board
Condensers & Heat Pumps
GSX 13 Seer 18-60 410A Scroll Condenser
Product Features:
• R-410A chlorine-free refrigerant
• Energy-efficiency compressor
• Factory-installed liquid line filter drier
• Copper tube/aluminum fin coil
• Brass liquid & suction line valves
• Contactor with lug connection
• Ground lug connection
• AHRI certified; ETL listed
GSX 14-16 Seer 18-60 410A Scroll Condenser
Product Features:
• High-efficiency scroll compressor
• R-410A chlorine-free refrigerant
• Liquid refrigerant return protection
• Factory-installed liquid
• line filter drier
• 850 RPM condenser fan motor
• Copper tube / enhanced
• aluminum fin coil
• Service valves with sweat
• connections and gauge ports
• Louvered sound control
• top for quiet operation
• AHRI certified; ETL listed
GSZ 14 Seer Up to 15 Seer 410A 9.0 HSPF Performance Scroll Heat Pump
Product Features:
• High-efficiency scroll compressor
• SmartShift™ technology to ensure quiet, reliable defrost
• Factory-installed bi-flow
• liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor
• crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Copper tube / enhanced aluminum fin coil
• AHRI Certified; ETL Listed
Air Handlers
ARUF 18-60 Air Handler (with or without Heat)
Product Features:
• Direct-drive, multi-speed motor allows air volume variation for heating and cooling applications
• All-Aluminum evaporator coil
• Transformer & blower time-delay
• New SmartFrame™ cabinet construction
• Galvanized leather-grain embossed finish
• 21" cabinet depth for easy attic access
• Coil-mounting track for quick repositioning
• Glue-less cabinet insulation retention
• Multiple electrical knockouts
• Suitable for horizontal, vertical, upflow, or downflow installations
• Improved condensate management
• Screw-less sides & back prevents condensation
• Three-hole condensate pan
• Tool-less filter access accommodates standard-size filters
• Factory-sealed cabinet achieves less than 2% leakage rate
AVPTC 24-60 Variable Speed Air Handler With Installed TX Valve
Product Features:
• Compatible with the ComfortNet Communicating System family of products
• New SmartFrame™ cabinet construction
• Factory-installed thermal expansion valves for cooling and heat pump applications
• Variable-speed ECM blower motor provides constant CFM over a wide range of static pressure conditions independent of duct system;provides low CFM for efficient fan-only operation
• Up to 12 field-selectable airflow settings can be adjusted to optimize the system’s CFM for each individual mode of operation
CFM indicator
• Auto configuration of the airflow and tonnage in communicating mode
• Maximum four low-voltage wires required for operation in communicating mode
• Improved humidity control and comfort
• Compatible with heat pumps and variable-capacity cooling applications
• Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections

ARUF SmartFrame™ Air Handler **NEW**
Goodman's new SmartFrame™ Air Handlers now in stock at N&N Supply Co. 410A, Multi Position, Multi Speed.
Features:
ARUF (with or without heat)
• Direct-drive, multi-speed motor allows air volume variation for heating and cooling applications
• All-Aluminum evaporator coil
• Transformer & blower time-delay
• New SmartFrame™ cabinet construction
• Galvanized leather-grain embossed finish
• 21" cabinet depth for easy attic access
• Coil-mounting track for quick repositioning
• Glue-less cabinet insulation retention
• Multiple electrical knockouts
• Suitable for horizontal, vertical, upflow, or downflow installations
• Improved condensate management
• Screw-less sides & back prevents condensation
• Three-hole condensate pan
• Tool-less filter access accommodates standard-size filters
• Factory-sealed cabinet achieves less than 2% leakage rate
• AHRI certified; ETL listed

Evaporating Coils
CAPF 1-1/2 - 5 Ton A Coil
Product Features:
• Rust-resistant, thermoplastic drain pans
• Coil painted Architectural Gray
• Grooved aluminum tubing and corrugated aluminum fin coil
• AHRI certified; ETL listed
CHPF 1-1/2 - 5 Ton Horizontal Coil
Product Features:
• Rust-resistant, thermoplastic drain pans
• Coil painted Architectural Gray
• Grooved aluminum tubing and corrugated aluminum fin coil
• AHRI certified; ETL listed
CAPT A Coil with TX Valve
Product Features:
• Rust-resistant, thermoplastic drain pans
• Coil painted Architectural Gray
• Internal factory-installed TXV
• Grooved aluminum tubing and corrugated aluminum fin coil
• AHRI certified; ETL listed

Heat Kits & Expansion Valves
HKSC05X 5KW, HKSC08X 8KW, HKSC10X 10KW, HKSC15X 15KW, HKSC20D 20KW Heat Kit
Expansion Valves
TX2N4, TX3N4, TX5N4 R410A - Expansion Valve SSX
TXV-30, TXV-42, TXV-48, TXV-60 R410A - Expansion Valve GSX






