Pipe Insulation
Fiberglass Insulation
Can be used where foam pipe insulation is not appropriate. This pipe cover features a pre-slit tube with a self-sealing jacket and can be used for pipes exiting furnaces and water heaters.
Features:
- Pre-slit self sealing - fiberglass
- Used for existing furnace and water heaters
- Commercial grade for high temperature use
- Good for steam heat systems
N&N Supply Stocks:
- 1-1/2IPS X 3FT Fiberglass Pipe Insulation
- 114IPS OR 158ID (112C) 3FT Fiberglass Pipe Insulation
- 12IPS OR 78ID (34C) 3FT Fiberglass Pipe Insulation
- 1IPS OR 138ID (114C) 3FT Fiberglass Pipe Insulation
- 2-1/8ID (2CC) X 3FT Fiberglass Pipe Insulation
- 2IPS X 3FT Fiberglass Pipe Insulation
- 34IPS OR 118ID (1CC) 3FT Fiberglass Pipe Insulation
- 38IPS OR 58ID (12CC) 3FT Fiberglass Pipe Insulation
Rubatex
Insulation products and accessories are widely recognized by the HVAC/R and Plumbing wholesale trade as having superior product characteristics, including cold weather flexibility, durable skin surface.
Features:
- Moisture Vapor Resistance
- Withstands temperature ranges of -70[DEG]F to 200[DEG]F (-57[DEG]C to 93[DEG]C)
- Mold and mildew resistant
- Helps lower energy use and costs
N&N Supply Stocks:
- 1-1/8ID X 3/8WALL X 6FT Rubatex (Fits 1-1/8OD Copper)
- 1/2ID X 3/8WALL X 6FT Rubatex (Fits 1/2OD Copper)
- 1/4ID X 3/8WALL X 6FT Rubatex (Fits 1/4OD Copper)
- 3/4ID X 3/8WALL X 6FT Rubatex (Fits 3/4OD Copper)
- 3/8ID X 3/8WALL X 6FT Rubatex (Fits 3/8OD Copper)
- 5/8ID X 3/8WALL X 6FT Rubatex (Fits 5/8OD Copper)
- 7/8ID X 3/8WALL X 6FT Rubatex (Fits 7/8OD Copper)
Aerotube
Insulation products and accessories are widely recognized by the HVAC/R and Plumbing wholesale trade as having superior product characteristics, including cold weather flexibility, durable skin surface.
Features:
- Moisture Vapor Resistance
- Seam Seal Pressure Sensitive Adhesive for quick and easy installation.
- Withstands temperature ranges of -70[DEG]F to 200[DEG]F (-57[DEG]C to 93[DEG]C)
- Mold and mildew resistant
- Helps lower energy use and costs
N&N Supply Stocks:
- 5/8ID X 1/2WALL X 6FT Aerotube
- 2-1/8ID X 1/2WALL X 6FT Aerotube
- 7/8ID X 1/2WALL X 6FT Aerotube
- 1-1/8ID X 1/2WALL X 6FT Aerotube
- 1-3/8ID X 1/2WALL X 6FT Aerotube
- 1-5/8ID X 1/2WALL X 6FT Aerotube
- 2-5/8ID X 1/2WALL X 6FT Aerotube
- 3-1/8ID X 1/2WALL X 6FT Aerotube
- 4-1/8ID X 1/2WALL X 6FT Aerotube
Bubble Foil Duct Wrap
Features:
HVBP48100 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 48" x 100 Ft
• Model Number: HVBP48100
• Roll Dimensions: 48 inch x 100 Feet
• Temperature Range: 250° Operational
• Nominal Thickness: 5/16 inch (.312)
• Weight: 1.25 oz./sq. ft.
• Flame Spread Index (ASTM E 84): 20
• Smoke Developed Index (ASTM E 84): 30
• Fire Rating: Class A/Class 1
• Linear Shrinkage: None
• Reflectance (IR): 97%
• Water Vapor Transmission (ASTM E 96): 0.02
• Puncture Resistance: 60 lb./in.
• Mold and Mildew: No Growth
• Emittance: 0.3
• Tensile Strength: 3.7 N/mm
• Pliability: No Cracking
• Hot Surface Performance: Passed
• Costs less to install
• Lightweight and clean
• No nesting characteristics for birds/insects/rodents
• No need for protective garments or respirators when installing
• Permanent and maintenance free
NOTE: Not for use in direct contact on surface temperatures that are 180° F or greater
HVBP2405002 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 24" x 50 Ft
• Model Number: HVBP2405002
• Roll Dimensions: 24 inch x 50 Foot
• Temperature Range: 250° Operational
• Nominal Thickness: 5/16 inch (.312)
• Weight: 1.25 oz./sq. ft.
• Flame Spread Index (ASTM E 84): 20
• Smoke Developed Index (ASTM E 84): 30
• Fire Rating: Class A/Class 1
• Linear Shrinkage: None
• Reflectance (IR): 97%
• Water Vapor Transmission (ASTM E 96): 0.02
• Puncture Resistance: 60 lb./in.
• Mold and Mildew: No Growth
• Emittance: 0.3
• Tensile Strength: 3.7 N/mm
• Pliability: No Cracking
• Hot Surface Performance: Passed
• Costs less to install
• Lightweight and clean
• No nesting characteristics for birds/insects/rodents
• No need for protective garments or respirators when installing
• Permanent and maintenance free
NOTE: Not for use in direct contact on surface temperatures that are 180° F or greater