Die-cast heavy duty model comes complete with 3 double point blades

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

• 12F - 12" (31 cm) Folding Tool with 3/8" (9.5 mm) & 1" (25.4 mm) depths .

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

• 18F - 18" (46 cm) Folding Tool with 3/8" (9.5 mm) & 1" (25.4 mm) depths . Longer folding tool assures a more uniform fold.

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

• 24F - 24" (61 cm) Folding Tool with 3/8" (9.5 mm) & 1" (25.4 mm) depths. Extra long folding tool may also be used as a mini-brake by roofing and siding applications.

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, - even light gauge metal. 

Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal. Retractable tip is easily replaceable.

Replacement for A50

Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction.

Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction.

Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction.

Extensions fit any electric power drill or 1/4-inch power drive holder.

By drilling its own hole, Bit-Tip® produces the optimum hole size, resulting in better thread engagement and a tighter fit. One operation fastening also means no alignment problems.

Stocking:

BT131T 1/2 (1000 TUB)
BT131X 1/2 (100 BOX)
BT133T 3/4 (500 TUB)
BT133X 3/4 (100 BOX)
BT134T 1   (500 TUB)
BT134X 1   (100 BOX)

The handle opening of Malco's REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand.

The handle opening of Malco's REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand.

Clear, molded acetate CONNEXT handles are shock-proof, shatter-proof and fluted to fit any hand. Handles come in full grip or stubby sizes and are equipped with a quick-connect holder mechanism to accept any 1/4-inch shank chuck driver including Malco Magnetic Hex Chuck Drivers, Hollow Hex Chuck Drivers and Phillips Chuck Drivers.

Clear, molded acetate CONNEXT handles are shock-proof, shatter-proof and fluted to fit any hand. Handles come in full grip or stubby sizes and are equipped with a quick-connect holder mechanism to accept any 1/4-inch shank chuck driver including Malco Magnetic Hex Chuck Drivers, Hollow Hex Chuck Drivers and Phillips Chuck Drivers.

Clear, molded acetate CONNEXT handles are shock-proof, shatter-proof and fluted to fit any hand. Handles come in full grip or stubby sizes and are equipped with a quick-connect holder mechanism to accept any 1/4-inch shank chuck driver including Malco Magnetic Hex Chuck Drivers, Hollow Hex Chuck Drivers and Phillips Chuck Drivers.

Additional Specs

9 Piece Kit: 3-Each ¼-in., & 5/16-in. driver shafts in short, medium & long varieties & 3 handles, including stubby, full grip and full grip ratcheting style.

Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand. 

Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand. 

OFFSET DUCT STRETCHER - Same features as DS1 plus offset handle to eliminate knuckle contact.

Built-in wire cutter lets you finish the job you started with just one tool! Double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. Comfortable, non-slip vinyl gripped handles.

Fin Straightening tool for 8, 10, 12 , or 14 fins per inch

Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.4 mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20-gauge (1.02 mm) galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes.

A unique thread design and quality controlled manufacture spell the Zip-In® difference. Zip-In's® sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength.

Stocking: 

HW7x1/2ZT   (1000 Tub)
HW7x1/2ZX   (100 Box)
HW8x3/4ZT   (1000 Tub)
HW8x3/4ZX   (100 Box)
HW8x1ZX     (100 Box)
HW8x1-1/2ZX (50 Box)
HW8x2ZX     (50 Box)

Strong molded plastic frame with pocket clip. Multi view vial reads top, bottom or side.

Duplex milled aluminum frame with “cycolac” end plates is lightweight and withstands shock or abuse.