HVAC Accessories


AC Conduit Kits (Whips)

6-12-4 4ft Whip #10 6-12-6 6ft Whip #10 6-32-6 6ft Whip #8

6-12-4 4ft Whip #10
6-12-6 6ft Whip #10
6-32-6 6ft Whip #8

 
Liquid-tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting. Three distinct wire colors for ease of hook-up. 1 straight and 1 90 degree metallic or non-metallic connector. 90 degree connector is removable for straight connections. (Second straight connector not included.) U.L. and C.U.L Listed.

Condensate Pumps

CP22  120 Volt Condensate Pump    CP22-230 230 Volt Condensate Pump

CP22 120 Volt Condensate Pump

CP22-230 230 Volt Condensate Pump

 
CP22LP 120 Volt Low Profile Condensate Pump

CP22LP 120 Volt Low Profile Condensate Pump


Bi-Flow Dryers

DBF163S 3/8OD Heat Pump Dryer

DBF163S 3/8OD Heat Pump Dryer

 

The DBF Series is designed specifically for heat pump or reverse cycle application. External check valves are not required since they are incorporated within the filter dryer shell. The core design filters out contaminant particles down to 25 microns. 100% copper sweat or nickel plated flare fittings. Desiccant core provides reliable and effective, removal of solid contaminants, acid and moisture. Provides three times the filtration as the standard bi-flow. Core is cushioned in fiber gaskets to protect core and to insure trouble-free performance. Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion.


DAD083S 3/8OD Liquid Dryer (1/1/2 - 2/1/2 Ton)

DAD083S 3/8OD Liquid Dryer (1/1/2 - 2/1/2 Ton)

 
DAD163S  3/8OD Liquid Dryer (3-31/2 Ton)

DAD163S 3/8OD Liquid Dryer (3-31/2 Ton)

 
DAD303S  3/8OD Liquid Dryer (4-5 Ton)

DAD303S 3/8OD Liquid Dryer (4-5 Ton)

 

Liquid Line Dryers

High moisture and acid capacity. Maximum filtration capacity. Exceptional compatibility with new polyester oils. Compatible with all existing and new refrigerants and blends including 134a, 401A/B, 402A/B, 404A, 407A/B/C, 410A, 502, 507A. Spring loaded, molecular sieve and activated alumina. Solid copper sweat fittings. Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion. Eliminates concern of additive stripping.


DSS-SLD306SV 3/4OD Suction Dryer

DSS-SLD306SV 3/4OD Suction Dryer

 
DSS-SLD306SV 3/4OD Suction Dryer

DSS-SLD306SV 3/4OD Suction Dryer

 
DSLD13-6SVHH 3/4OD 

DSLD13-6SVHH 3/4OD 

 
DSLD27-7SVHH 7/8OD

DSLD27-7SVHH 7/8OD

Suction Line Dryers

The solid-core clean-up dryer was developed for use in a system suction line. The compact design incorporates a large outside diameter shell, which results in a shorter lay-in length, and a larger core, which provides a greater filtration area for maximum operating efficiency.


Hard Start Kits

• The DST-6 can be used on all PSC single phase compressors from 1-1/2 to 10 H.P. A unique combination of relay and safety timer. The capacitor is automatically disconnected in 0.5 seconds if the compressor fails to start.

• The DST-10 the VariTorque™ 690% Boost, Instant Recycling Hard Start Kit. Adjustable starting torque allows installer to optimize motor starting and minimize problems normally associated with hard start kits. Adjust to reduce electrical load problems including light flicker on compressor startup. Includes patent pending circuitry which protects capacitor, motor and relay. LED indicator provides easy 2 wire hookup. 1/2 to 10 HP

DST-6

DST-6

 
DST-10

DST-10

 
• CSR-U-1 1-2-3 TON  • CSR-U-2 3-1/2-4 TON  • CSR-U-3 4-5 TON 

• CSR-U-1 1-2-3 TON 
• CSR-U-2 3-1/2-4 TON 
• CSR-U-3 4-5 TON 


Quick Disconnect Boxes

DDS-30 AMPED FUSED

DDS-30 AMPED FUSED

 
DDS-60 AMPED FUSED

DDS-60 AMPED FUSED

 
DDS-60U UNFUSED

DDS-60U UNFUSED


Heat Pump Risers

HPR-3-2PG
 
HPR-EXT

Air Filters

Panel Filters

Designed for general air filtration applications with light to medium dust loading conditions, HeavyDuty™ disposable panel filters are engineered for sturdy, economical performance and ease of use. The expanded metal support and skin provide excellent, corrosion-resistant support for the fiberglass. The heavier construction of the fiberglass allows a better adhesive bond with the expanded metal grid for superior strength and durability. Compression resistant glass fibers decrease media pad deterioration, extending the life of the filter. Available in a wide range of sizes, HeavyDuty™ panel filters are used in all types of HVAC systems to protect the coils from dirt. They are also used as prefilters to extend the life of higher efficiency filters. (spec sheet)

PerfectPleat HC

Designed, developed, and patented by AAF, the PerfectPleat HC M8 is a product with form and fit unlike any other pleated filter in the marketplace today. The automated and controlled process AAF has developed for the PerfectPleat HC M8 eliminates inconsistencies and irregularities in order to provide the filtering efficiency you need and expect.
At the core of every PerfectPleat HC M8 filter is DuraFlex®, American Air Filter's patented, self-supporting media. When pleated, DuraFlex will hold its shape without the need for wire support characteristic of conventional, pleated filters. That means safer handling, with no risk of nicks or cuts during installation. The absence of wire also means that the filter will not rust and is totally incinerable, which simplifies disposal. (spec sheet)

Trion Humidifiers and Air Cleaners

  1. Trion HE1400 16x25 high efficiency electronic air cleaner. The HE1400 is a complete system, connect the ductwork and plug in.
  2. Trion HE2000 20x25 high efficiency electronic air cleaner. The HE2000 is a complete system, connect the ductwork and plug in.

Trion CM200 is a compact, durable, evaporative humidifier that was designed for homes up to 2800 square feet, where there may be limited space available for mounting. The evaporated water is released into the home by the furnace or air handler.


CB100.jpg

Trion CB100 features available with Trion’s newest fan powered evaporative humidifier. Models are available with traditional controls or the H2OSmart™ Technology which maximizes performance and saves water regardless of system conditions.

The evaporative humidifier is installed into the supply duct and air is drawn across the moist evaporator pad (wetted through the home’s water supply). The evaporated water is efficiently released into the home by the furnace or air handler. The adjustable, precision-made humidistat allows the user to choose the optimum humidity level for maximum indoor comfort.

Features

  • Optional patented H2OSmart™ Technology provides maximum performance, water savings, and fault annunciation.
  • Highest peak capacity delivers up to 20 gallons per day at 140ºF.
  • The built-in fan motor helps deliver maximum humidity.
  • Push-to-lock fittings simplify installation and provide worry-free operation.
  • Flexible Humidity Control – Models are available with conventional mechanical humidistats or electronic humidistats with an outdoor temperature sensor.

707

Trion 707 atomizing humidifiers are installed onto the return duct where a superfine mist is generated, quickly absorbed into the air, and distributed into the home. The 707 can also operate as a free standing unit where a superfine mist is fed directly in to a room.